Pneumatic conveying solution for potassium chloride

During the processing and transportation of potassium chloride, enterprises often face challenges such as severe dust pollution, material moisture and clumping, low conveying efficiency, and rapid equipment wear. Traditional mechanical conveying methods not only increase manual cleaning costs but also easily cause material loss, affecting product quality and production continuity.

Material characteristics

Potassium chloride is a white crystalline powder or granules, easily soluble in water, and generally hygroscopic. Its particles have relatively low hardness, average flowability, and are prone to pipe adhesion in humid environments. Therefore, during conveying, mechanical squeezing, moisture-proof sealing, and controlling airflow speed are needed to prevent crushing.

Product Introduction

The pneumatic conveying system for potassium chloride provided by Head Powder uses positive or negative pressure dense phase conveying technology, specifically designed for moisture-proofing, anti-caking, and low-crushing requirements for potassium chloride. The system consists of air source equipment, feeding devices, conveying pipelines, dust separation and control units, and can be customized according to capacity, distance, and operating conditions to achieve fully enclosed and automated conveying.

Product advantages

To address customer pain points, this solution offers the following solutions:
· Fully enclosed pipeline system prevents dust leakage and improves the working environment;
· Nitrogen or dry air is used as the carrier, combined with dehumidification pretreatment, effectively preventing material moisture absorption and caking;
· Low-speed dense phase conveying reduces particle collision and breakage, maintaining product integrity;
· The intelligent control system monitors material-gas ratio, pressure, and flow in real time, reducing manual intervention and lowering operation and maintenance costs.