Focusing on pneumatic conveying of powder, granules, and powders, leveraging industry-university-research technology advantages to create sealed, dust-free precision conveying solutions. For inquirie
Focusing on pneumatic conveying of powder, granules, and powders, leveraging industry-university-research technology advantages to create sealed, dust-free precision conveying solutions. For inquirie
Introduction:
In the production of lithium battery cathode and anode materials, the discharge stage is prone to dust leakage and material blockages, leading to production line shutdowns and equipment losses, directly affecting production efficiency and cost control. The Head powder lithium battery discharger improves dust leakage and material adhesion issues through optimized sealing structures and flow channel design, supporting continuous normal operation.
In the production of lithium battery cathode and anode materials, the discharge stage is prone to dust leakage and material blockages, leading to production line shutdowns and equipment losses, directly affecting production efficiency and cost control. The Head powder lithium battery discharger improves dust leakage and material adhesion issues through optimized sealing structures and flow channel design, supporting continuous normal operation.
The Head Powder Lithium Battery Discharger is specially designed for the sealed conveying and discharging of cathode and anode materials (such as lithium iron phosphate, ternary materials, graphite, etc.) in the lithium battery industry. Made from corrosion-resistant and wear-resistant materials and fine processing techniques, it features high sealing, low residue, and easy maintenance. It is suitable for the end of pneumatic conveying systems or the bottom of storage bins, helping to achieve clean and automated production.
High Sealing Structure: Combines dual-layer sealing with inflatable sealing rings, with leakage rates as low as industry standards, effectively preventing fine dust from escaping.
Wear and corrosion resistance: The contact parts of materials use ultra-wear-resistant alloys or ceramic coatings to adapt to the wear and chemical corrosion resistance of lithium battery materials.
Anti-bridge design: Curved discharge port angled with special blades prevents material from bridging or accumulating inside the chamber, ensuring smooth discharge.
Intelligent control compatibility: supports variable frequency speed regulation and remote start-stop, can be connected to DCS/PLC systems for automated joint control.
Modular quick-disconnect: The overall modular structure eliminates the need to dismantle pipes during maintenance and cleaning, greatly reducing downtime.
Lithium battery dischargers are non-standard customized products, with prices varying greatly depending on equipment model, material configuration, conveying capacity, and working condition requirements. Specific quotations need to be customized based on actual process parameters (such as material characteristics, discharge volume, installation space, etc.). We welcome you to provide your required parameters for targeted solutions and quotations.
Free technical consultation: Based on material testing and on-site conditions, we provide selection advice and solution design.
Customized production: Strictly customizing specifications, materials, and control systems according to customer process requirements.
Quality Support: Key components are sourced from branded suppliers, and each unit is sealed and tested for operation before leaving the factory.
After-sales response: remote diagnosis within 12 hours, and engineers to arrive on site within 48 hours (domestic).
Spare parts supply: Long-term supply of original factory parts helps ensure worry-free maintenance throughout the entire equipment lifecycle.
| Parameter name | Parameter content |
|---|---|
| Discharge volume range | 1~80 m³/h (different models) |
| Applicable material particle sizes | ≤ 10 mm (customizable larger) |
| Operating temperature | -20°C~200°C (special temperatures can reach up to 350°C) |
| Sealed form | Air seal + mechanical seal (optional nitrogen protection) |
| Material | 304/316L stainless steel / special alloy / ceramic lining |
| Drive method | Gear reduction motors / variable frequency speed control motors |
| Connection method | Flange Connection (Standard or Non-standard Customization) |
| Explosion-proof rating | Ex dII.BT4 / Ex tD A21 (optional) |
Products
Cases
The most frequently asked questions before placing an order. If you can't find the answer, you can leave a message or consult online.
Specify materials and operating conditions; engineers calculate selection parameters and provide configuration lists; Drawings and technical documentation for this model can also be requested directly.
Leave a message or call; engineers calculate selection parameters by model and send back technical data. Response within 2 hours on working days, and model selection recommendations within 24 hours.
