Pneumatic conveying solution for sepiolite conveying

During material handling, sepiolite is lightweight, porous, and easily absorbs moisture, leading to frequent issues such as pipeline blockages, severe dust leakage, and high energy consumption during traditional mechanical transportation. Especially when material humidity fluctuates or particle sizes are uneven, equipment wears out quickly, maintenance costs are high, and dust environments pose threats to operator health and production safety. Customers urgently need a sealed, efficient, and low-loss conveying solution.

Material characteristics: key parameters of sepiolite

Sepiolite is a natural fibrous aqueous magnesium silicate mineral, with a density of about 0.4-0.6 g/cm³, a wide particle size distribution (0.5-5 mm), and a water content typically ≤ 15%. Its surface is porous and has a low coefficient of friction, but it tends to clump easily when wet. During pneumatic conveying, airflow speed must be controlled to avoid material crushing and pipeline deposition.

Product Introduction: Customized sepiolite pneumatic conveying solution

Head Powder provides sepiolite pneumatic conveying system equipment tailored to the material characteristics of sepiolite. This solution uses sealed pipelines for negative or positive pressure conveying, combined with moisture-proof separation devices and speed control modules, achieving fully automated transfer from the raw material silo to the point of use. Core system components such as the rotary feeder, cyclone separator, and pulse bag dust collector are all treated for wear and rust resistance, adapting to the slight corrosiveness and fragile characteristics of sepiolite stone.

Product Advantages: Targeted solutions to customer pain points

Head Powder's sepiolite pneumatic conveying solution addresses customer challenges from three aspects:

• Anti-clogging and anti-clumping:The system is equipped with airflow regulation and arch-breaking devices to adapt to materials with different humidity levels, reducing the risk of pipeline blockages.
• Low dust emissions:Fully sealed conveying combined with high-efficiency pulse dust removal, on-site dust concentration below national standards, supporting a clean working environment.
• Relatively accurate measurement and low damage:Uses variable frequency speed control feeders to match sepiolite characteristics, reducing material crushing rate to below 3%, while supporting on-demand quantitative output.